Watlow MINICHEF 2000 Manuel d'utilisateur télécharger pdf (Page 31)

30 ■ Watlow MINICHEF 2000 Hardware & Software Setup Guide

Step 6 Set the Real-time Clock

These instructions are optional and apply only to controllers that are purchased with

the Real-time clock (time of day) option. (Part number example: F2 _ _ - _ _ _ _ - 1 _ _ _)

To set the time of day

1. Press the Edit key and Home key simultaneously for approximately 3 seconds. You

are now in the Real-time Clock Program Mode.

2. To change the time press the Up-arrow or Down-arrow key. Note that [A````] indi-

cates a.m. and [P````] indicates p.m..

3. With the desired time on the display, press the Enter key. The new value will be

saved and the unit will return to the Operation Mode.

Depending on how the controller was programmed in the Configuration Mode, one of

the following will appear on the display:

Time of day (if [SEtUP] / [CLoc`] is set to [``YES]

in the Configuration Mode).

[`idLE] (if [SEtUP] / [CLoc`] is set to [```no]

in the Configuration Mode).

MINICHEF 2000

[P1@£0]

Edit Accept

Back-UpExit

MINICHEF 2000

[P1@£0]

Edit Accept

Back-UpExit

Edit Accept

Back-UpExit

MINICHEF 2000

[A1!£0]

Edit Accept

Back-UpExit

MINICHEF 2000

[A1!£0]

Edit Accept

Back-UpExit

MINICHEF 2000

[00000]

Step 6 Set the Real-time Clock

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 70 71

Pas de commentaire

Watlow MINICHEF 2000 Manuel d'utilisateur Page 31